Vape_device_user_manual_cover_(singapore vape)

Vape Device User Manual

Vape Device User Manual: A Complete Beginner's Guide

Introduction

Vaping has rapidly grown in popularity as an alternative to traditional smoking, offering a range of flavors, devices, and features to suit every user's needs. Whether you're a beginner or upgrading to a more advanced setup, understanding how to use your vape device correctly is essential for safety, performance, and longevity.

This vape device user manual will guide you through the general setup, usage, maintenance, and frequently asked questions to ensure you get the most out of your device.

Vape_device_user_manual_infographic_(singapore vape)

1.0 DD Touch Device – User Manual

How to Use

1.1 Charge the Device

Connect the USB-C cable to the device and a power source. Charging takes around 30 minutes.

LED Indicator:

  • Blinking = Charging
  • Off or Solid = Fully charged

1.2 Insert the Pod

Remove protective seal from the pod (if any). Gently insert the pod into the device. The magnet will click the pod into place securely.

1.3 Vape

Simply inhale through the mouthpiece. The LED will briefly light up while vaping.

LED Light Indicators:

  • LED Behavior   
  • Blinks during inhale - Device active
  • Rapid blinking - Low battery or connection issue 
  • No light Fully charged or idle

 

2.0 DD Cube Max – User Manual

How to Use the Device

2.1 Charge the Device:

  • Plug in the USB-C cable to charge. Charging time: ~60 minutes
  • LED will blink while charging and turn off or solid when fully charged.
  • This device come with 1st generation adaptor and 4th generation adaptor. You can change the adaptor depends on your pod.

2.2 Insert a Pod

Remove pod packaging and safety cap. Align and gently push the pod into the top of the device. A magnetic snap will secure it in place.

2.3 Start Vaping

Inhale through the mouthpiece – the device activates automatically. The LED will flash or light up during use.

LED Light Guide:

  • Blinks while puffing - Low battery
  • Solid during puff - Device working normally
  • Blinks rapidly - Charging issue or connection error

 

3.0 RELX Infinity 2 Plus – User Manual

How to Use the Device

3.1 Charge the Device

Plug into a USB-C charger. Charge time: ~30–40 minutes

Battery LED Indicators:

  • Green Light: High battery (60%-100%)
  • Yellow Light: Medium (30%-60%)
  • Red Light: Low (<30%)

3.2 Insert a Pod

Unpack your RELX infinity pod. Align and insert it into the device — it clicks magnetically into place. You can adjust the power with press the device’s button. Green light 6.5w, blue light 8w, purple light 10w.

3.3 Vape

Simply inhale through the mouthpiece. The LED indicator will light up with each puff. If using too frequently, a SmartPace vibration alert may activate to remind you to slow down.

LED Indicators Guide (battery percentage):

  • Green (60–100%)
  • Yellow (30–60%)
  • Red (<30%)
  • Blinking Red (0% or error)

SmartPace Vibration

The device vibrates if you take more than 15 puffs within 10 minutes, reminding you to take it easy.

 

4.0 Akso Supa Pro Battery Device – User Manual

How to Use the Device

4.1 Charge the Device

  • Plug in the USB-C cable to a power source.
  • Charging time: ~45 minutes
  • LED Behavior: While Charging: the led indicator will show the battery level status.

The akso supa battery have 2 button, press 2 button in same time with few second to unlock, then adjust the wattage between 10W-20W. You can lock the device with press 2 button few second.

4.2 Insert a Pod

Use Akso Supa Pro pods only. Remove any seals from the pod. Gently insert into the top of the device — it will lock in magnetically.

4.3 Start Vaping

Simply inhale through the mouthpiece.

 

5.0 Carabat Leafbar Device – User Manual

How to Use the Device

5.1 Charge the Battery

  • Use the USB-C port to charge via wall adapter, PC, or power bank.
  • Charging time: ~45 minutes.

5.2 Insert the Pod

Remove the Carabat pod from its packaging. Align the magnetic connectors and insert into the top of the device. A soft “click” indicates proper installation.

Press the on off button (right below) 5 times to lock and unlock device. Press the on off button to adjust wattage from 12/ 16/ 20/ 24W. Below the device can adjustable airflow.

5.3 Start Vaping

Simply inhale through the mouthpiece. The LED light will activate while puffing to show the device is working.

 

6.0 Elf Bar Ice King 30K – User Manual

How to Use the Device

6.1 Power & Activation

Remove the silicon cover from mouthpiece. Adjust the power with 3 power mode, which is turbo 1,2 and 3.

6.2 Adjusting Airflow and ice level

Locate the airflow slider at the base. Adjust the ice level which press the button. Come with 5 ice level. The led indicator show the ice level, battery and eliquid level. Simply inhale from the mouthpiece to activate.

 

7.0 Elf Bar Raya D2 20K – User Manual

How to Use the Device

7.1 Power & Activation

You can adjust the power mode at the below of the device. There have 2 power mode which is turbo mode (more vapor, flavor more rich) and normal mode.

No buttons – simply inhale to activate. LED or screen lights up during puff. The led screen show the battery and eliquid level.

7.2 Charging the Device

  • Connect the device via USB-C cable.
  • Full charge: ~60 minutes
  • Battery indicator on screen shows real-time charge level.

 

8.0 Lana Fizz 12K – User Manual

8.1 Activate the Device

Press the button 5 times at the bottom of device to on/off device. The animation will appear on the screen with device starting up. When the animation finish, the device is on.

You can press the bottom of the button to adjust the wattage with 13/14/15/16W. The led indicator show the battery and eliquid level status.

8.2 Charging the Device

  • Plug in using the USB-C cable to a wall adapter or power bank.
  • Charging time: ~45–60 minutes

 

9.0 Lana Iris 30K – User Manual

How to Use

9.1 Activate the Device

Simply inhale through the mouthpiece to activate. The LED screen will light up, displaying current settings.

9.2 Switch Between Modes

To toggle between ECO (around 30k puff) and BOOST (around 20k puff) modes:

Inhale twice rapidly or follow the specific instructions provided in the quick start guide. The screen will indicate the active mode.

9.3 Adjust Airflow

Locate the airflow slider or dial on the device. Slide or turn to adjust the draw resistance to your preference.

9.4 Charge the Device

Connect the USB-C cable to the charging port. Plug into a compatible power source. The LED screen will display the charging status. Charging time is approximately 60 minutes.

 

10 Lana Touch 32K – User Manual

Getting Started

10.1 Powering On/Off

Tap the touchscreen or fingerprint button 5 times rapidly to turn the device on or off.

10.2 Switching Power Modes

With the device powered on, tap the touchscreen or fingerprint button 3 times to toggle between:

  • Eco Mode (16W): For a smoother, longer-lasting experience.
  • Boost Mode (22W): For denser clouds and intensified flavor.

10.3 Adjusting Airflow

Locate the airflow control slider or dial on the device. Slide or turn to adjust the draw resistance to your preference.

10.4 Charging the Device

Connect the USB-C cable to the charging port. Plug into a compatible power source. The touchscreen will display the charging status. Charging time is approximately 60 minutes.

Touchscreen Display Indicators:

  • Battery Icon: Shows remaining battery life.
  • E-liquid Icon: Indicates e-liquid level.
  • Power Mode Indicator: Displays current mode—Eco or Boost.

 

11 Offgrid device user manual

How to Use an Off-Grid Vape Device 

11.1 Unboxing the Device

Remove the device from its packaging. If it's a rechargeable device, check if it needs charging first.

11.2 Powering On/Off

Off-Grid devices are draw-activated, meaning you just inhale to use. For button-activated models, press the power button 5 times quickly to turn on/off. Press the button 3 time to adjust wattage, wattage between 15,19,25W. 

11.3 Charging 

Use the included Type-C or Micro-USB cable. Plug it into a USB charger or power bank.

11.4 Vaping

Simply inhale from the mouthpiece. LED indicator may light up during usage.Stop inhaling once you get your desired puff.

 

Conclusion

Using a vape device responsibly and correctly ensures you get the best flavor, vapor production, and safety. Always refer to the official user manual specific to your device model, and avoid modifying or misusing the hardware. Whether you’re using a RELX, Elf Bar, Lana, Akso, Snowwolf, or DD device, the core principles of operation remain the same: charge smart, vape clean, and stay informed. Happy vaping!

 

Frequently Asked Questions (FAQ's)

Q1: How do I turn on my vape device?

A1: Most modern vape devices are draw-activated, meaning they activate automatically when you inhale. Some advanced models may require 5 quick presses of a power button to turn on or off.

Q2: Can I switch flavors with the same pod?

A2: It’s not recommended. Mixing flavors in the same pod can cause odd taste results. Use a fresh pod for each flavor for the best experience.

Q3: Can I use any charger for my vape?

A3: Use a certified USB-C or Micro-USB cable that matches the manufacturer’s specification. Avoid fast chargers unless the device supports it.

Q4: Can I refill my vape pod?

A4: Disposable devices: ❌ Not refillable. Closed pod systems: Usually ❌ not refillable

Back to blog